:::::: New Products ::::::
Wed, 2017-11-15 11:24
Edelbrock is excited to announce the AVS2 Series as the next generation of their carburetor product line. The AVS2 carburetor features annular flow primary boosters with a new calibration for improved off-idle and cruising performance.
The annular flow booster design delivers improved fuel atomization to eliminate flat spots that may be encountered when the carburetor transitions from idle to full throttle. Each annular booster features eight, equally-spaced orifices to improve fuel metering from idle to the main. The improved flow metering makes this carburetor ideal for use with a wide variety of small-block and big-block engines with either dual- or single-plane intake manifolds.
Tue, 2017-11-14 10:58
GForce Engineering has released driveline upgrades for the 2015+ Hellcat, SRT and Scat Pack Charger and Challenger. All new engineered 4.0” aluminum driveshafts, complete CV Half Shaft Axle upgrades and the complete 9” independent rear suspension kit.
Dodge redefined their lineup with the refresh in 2015 and release of the 707-horsepower Hellcat Charger and Challenger. Just as they went back to the drawing board with these cars, GForce Engineering did the same; bringing to market driveline packages and options to handle the power and abuse these cars are more than capable of.
The company started with the new 4.0” aluminum, one-piece driveshafts. Stronger and lighter than anything else on the market, these shafts are bolt-in, require no modifications and are high-speed balanced for a precision finish and reduction in NVH, which these cars can be prone to.
Thu, 2017-11-02 12:15
MAHLE Aftermarket Inc. unveiled a new line of MAHLE Performance gaskets for high-performance engines at this year’s Automotive Aftermarket Product Expo (AAPEX) in Las Vegas. The line initially covers select gaskets for the most popular engines modified for increased output. MAHLE Performance will serve as the over-arching brand under which gaskets – and in the near future performance engine parts like piston rings and Clevite engine bearings – will go to market.
“We’re excited to be making this announcement to coincide with the one-year anniversary of the launch of the MAHLE Original® gasket brand,” said Jon Douglas, President, MAHLE Aftermarket Inc. “MAHLE recognizes the tremendous opportunities in the automotive aftermarket for products with superior quality and advanced technology.”
Thu, 2017-11-02 08:54
Owners of the Gen 6 Camaro have an all-new track proven wheel for their machines at the drag strip. The WELD Racing Track Attack rear wheel comes in a 16x10–inch diameter/width (part number 88B-610SB-GM) and features WELD’s unique Single Beadlock geometry for precise and even clamping force. Each wheel comes with a black anodized center, polished outer rim, and features the Chevrolet Performance logo prominently machined on the Beadlock Ring.
“WELD Racing is the winningest wheel in drag racing history so it makes perfect sense for Chevrolet Performance to select WELD to develop the ultimate wheel for Gen 6 Camaro Sportsman drag racers,” said Henrique Cisneros, Chairman of WELD Racing.
Thu, 2017-10-12 09:25
VP Racing Fuels and Keystone Automotive have joined together to help increase breast cancer awareness and continue efforts to find a cure for this terrible disease. During the month of October, Keystone will donate $1.00 from the sale of every Pink VP Racing Container sold towards the Susan G. Komen organization. In return, VP will make a matching contribution at the end of the month as well to increase the contribution.
Tue, 2017-10-10 14:58
A long time ago, in a galaxy far, far away there lived a gentle giant. Let’s call him “Oakley.” Oakley made high-quality vision products and, thanks to his faithful servant, who we’ll call “Torch,” he began to make his presence known in numerous forms of motorsports, and that certainly included our favorite, drag racing. In fairly short order the giant had become, well, even larger, but then, as things sometimes happen in the world of giants and drag racing, a cold wind began blowing over the land. Soon the giant’s handlers had him taken back to his lair, from which he would never again emerge.
Thu, 2017-09-21 10:37
Edelbrock has announced the release of its much-anticipated Victor II EFI intake manifold for Gen III HEMI® engines.
Edelbrock Victor II EFI intake manifold (#7179) is designed for use with Eagle Chrysler 5.7L, 6.1L and 6.4L Gen III HEMI engines with fuel injection. The overall design is similar to the factory 6.1L SRT intake manifold, but features relocated fuel injector bosses for improved flow and added nitrous bosses along the near vertical runners. The Victor II EFI also features a wider plenum than the stock 6.1L which yields more room for the 14" long runners for increased power. This design, along with the aluminum construction, make this intake manifold make ideal for supercharged or turbocharged applications where the OEM active runner control is not desirable.
Sat, 2017-09-02 13:36
Strange Engineering has revealed a full line of 9 ½” & 10” ring and pinion gear sets from U.S. Gear and Motive. Based on the popular 9” Ford design, these gears are capable of handling the ever increasing horsepower in classes such as Pro Mod, Alcohol dragsters, Alcohol funny cars, and Radial vs. the world.
Mon, 2017-08-28 13:19
In late 2016 Dart went to work on redefining the LS engine platform. We introduced the Pro Stock inspired Race Series 10° cylinder head with a short deck LS Next block.
Fri, 2017-08-25 13:29
Strange Engineering, the leader in driveline and suspension for over 50 years, has developed a budget minded axle and spool package for 8.8” Ford. The 35 spline Alloy axles are forged from SAE 1550 Modified Steel.