Per NHRA rule: “Section 20: General Regulations, Frame: 4, 4:8 Parachutes (Page 19): “…Parachutes must have their own independent mounting with sleeved 3/8-inch minimum steel bolts or steel pins required for all applications unless otherwise stated in Class Requirements. The use of ball-lock pins for parachute mounting prohibited.”

For $150.00, we will upgrade your Stroud Chute to comply with the new regulations. We will also inspect your chute thoroughly for any damage that may affect proper operation and safety of your chute. If any damage is found, we will inform you of repair cost or if you need a new chute.

Per NHRA rule: “Section 20: General Regulations, Frame: 4, 4:8 Parachutes (Page 19): “…Parachutes must have their own independent mounting with sleeved 3/8-inch minimum steel bolts or steel pins required for all applications unless otherwise stated in Class Requirements. The use of ball-lock pins for parachute mounting prohibited.”

For $150.00, we will upgrade your Stroud Chute to comply with the new regulations. We will also inspect your chute thoroughly for any damage that may affect proper operation and safety of your chute. If any damage is found, we will inform you of repair cost or if you need a new chute.

Call us at 405-632-2022 if you have any questions or if you need to discuss your particular concerns or requirements

Be sure to visit our website at www.stroudsafety.com for more information on Stroud Safety drag chutes and launcher systems, restraint systems, ballistic containment, fire suppression systems, fire suits and much.

Check out Stroud’s Chute Packing video at http://www.youtube.com/watch?v=nRhWplI5yKc